Cushion Insert Instructions

OUR PRE-SEWN INSERTS MAKE IT EASY FOR YOU TO MAKE YOUR OWN CUSHIONS                                                             BACK TO ORDR PAGE

JUST FILL AND TIE SHUT.  INSERT INTO YOUR OWN CUSHION COVER OR USE UNDER A SLIP COVER.

  

STEP 1.  FILL YOUR TUBES USING A HAND MADE FUNNEL :   

USING A 3 LITER, PLASTIC WATER JUG WITH THE BOTTOM CUT OFF, 

SECURE A CARDBOARD PAPER TOWEL TUBE TO THE MOUTH OF THE JUG WITH DURABLE TAPE. 

STEP 2.  MASSAGE THE HULLS DOWN THE TUBE TO THE SEWN END.  FILL THE SMALLER BASE TUBES UNTIL THEY ARE PACKED FIRM.  FILL THE LARGER TOP LAYER TO THE DESIRED FEEL.  NOTE THE TOP LAYER SHOULD  BE PACKED LOOSE AND FEEL SOFTER THAN BASE.  

 STEP 3.  TIE THE TUBES CLOSED AND SMOOTH HULLS OUT SO TUBES ARE EVENLY PACKED AND TUBES MEASURE THE DESIRED WIDTH.  

  NO!        YES!

  ***  IMPORTANT NOTE:  DO NOT LIFT THE FILLED INSERT UNLESS YOU ARE HOLDING ALL THE END TUBES TOGETHER.   IF YOU PULL THE TUBES APART AS IN FIRST PHOTO ABOVE, YOU WILL RISK TEARING THE FABRIC AS HULLS ARE VERY HEAVY.  THE SECOND PHOTO SHOWS THE PROPER WAY TO LIFT AND POSITION YOUR CUSHION INSERTS.

YOUR INSERTS ARE READY TO USE!

 

  • Visa
  • MasterCard
  • Amex
  • Discover
  • PayPal